ufs3 firmware

**sivaprasad** · 25-10-2005 06:39 PM

respected members,
irequired UFS3 tornado firmware files like ufs3v2.6.7.fib or higher file to upgrade my box

**THE FOX** · 25-10-2005 09:36 PM

GO TO.....

http://www.ufs-3.org/info.asp

OPEN SUPPORT....

choose UFS3
Enter your box serial..

It will let you into the support area, firmware, flashes, software...

GOOD LUCK

**neilthirumuttam** · 28-10-2005 12:26 PM

which tool u r using to upgrade to avtivate BB5

**THE FOX** · 31-10-2005 01:53 AM

just run the new nokia software, it should ask you if you want to upgrade your firmware in the box...

also look here...

http://www.schwantz-i.com/zip/ufsxc0de.zip

look for the password in the forum...

**neilthirumuttam** · 05-11-2005 12:53 AM

do u know
how to upgrade box 2 bb5 without
fixing hwk
emulating hwk ?

**andre128** · 02-12-2005 09:51 AM

you need short the 2 pin for your box

**andre128** · 02-12-2005 09:56 AM

then flash your box with this (either one)

**neilthirumuttam** · 04-12-2005 05:59 AM

Originally Posted by andre128

you need short the 2 pin for your box

pls give me the details regarding the shoring

**alexmam_80** · 04-12-2005 12:01 PM

Open UFS3Tools
Conect- Put to update Firmware and eeprom in V2.5 and push Fix&Updare
Close

**neilthirumuttam** · 05-12-2005 01:17 AM

pls link to these
thanks in advance

**andre128** · 05-12-2005 11:13 AM

Originally Posted by neilthirumuttam

pls give me the details regarding the shoring

open the ufs-3 box connect then pin like the picture the use hwk raskulator flash the box

then use dctx bb5 test 10 for bb5, sams v1.4u, kzf v1.8b, LG v1.0a...

if you use the latest version, you can't use hwk function

**andre128** · 05-12-2005 11:19 AM

ufs3 tools (for update firmware v2.6)
http://www.geocities.com/nokia7610a/ufs3tools.zip

HWK raskulator
http://schwantz-i.com/~arash/hwk-emulator.zip

**neilthirumuttam** · 06-12-2005 01:48 AM

is there any new cracked exe s for
lg?
igot the nok sam & kzf

**neilthirumuttam** · 06-12-2005 01:46 PM

As u told I upgraded the box thruufs 3 tools
but the hwk area is different
that y icant short the points
there are only six ponts.
now when im trying to connect the box
it shows an error message
"Unexpected Exception:BOX_AUTH_ERROR:31",

Do u have any idea?
pls help

**andre128** · 07-12-2005 03:16 AM

Ooh... you're using clone box... you've use other method... i'll post the pic

**andre128** · 07-12-2005 04:22 AM

here the solution for clone ufs box

**neilthirumuttam** · 08-12-2005 01:44 AM

thanks u r great
yes ishall try and post the result tommorrow
thank u

**neilthirumuttam** · 10-12-2005 01:08 PM

As u told I shorted the two pins of the FTDI chip
and tried again , when trying to connect inthe exe
still the result is
"it shows an error message
"Unexpected Exception:BOX_AUTH_ERROR:31",
in what way I can get my box working?

**neilthirumuttam** · 13-12-2005 02:45 AM

As u told I shorted the two pins of the FTDI chip
and tried again , when trying to connect inthe exe DCTX
still the result is
"it shows an error message
"Unexpected Exception:BOX_AUTH_ERROR:31",

in what way I can get my box working
with UFSx_Dctx ?

but for sam or UFS_KZF it works& screen says
"UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1
UFS_USB V2.6 (c) SarasSoft 2005. S/n: 50000
HID: 33C9F72E00000000
HWK: A1.02-TEST
Licence: True "
0nly with nokia exe it says the error!

**andre128** · 14-12-2005 11:13 AM

which version dctx you use??? cracked version must use v1.4 test 10(for flash bb5), v1.4 test 14(not stable)...

dont use v1.3m, v1.4a,v1.4b, v1.4c...

**neilthirumuttam** · 16-12-2005 02:46 AM

pls a link to the cracked version which
is the best that u feel

**andre128** · 16-12-2005 06:09 AM

http://www.djawir.com/donlot/index.p...txBB5_14a_.rar

http://www.djawir.com/donlot/index.p...BB5_14_ALM.rar

http://www.djawir.com/donlot/index.p..._mikrocell.exe

http://www.djawir.com/donlot/index.p...xBB5_Tst14.rar

http://www.djawir.com/donlot/index.p..._14a_TST10.rar

**neilthirumuttam** · 21-12-2005 03:53 AM

I again done every thing form the very begining

shorted the two pins

1. with mprog i wrote the ufs good ept
2. with ufs tool emulated hwk
3 calculated the strings and connected

still with nokia it shows the error
"un eoxepted exeption: BOX ERROR: 1020

previous error code now changed

but to samsung & se it works
what myay be possible fault
iused allthe exes from the link
said above
14 tst reures encription password
that i dont hve
allthe others the same result

**nijascm** · 26-12-2005 07:43 AM

here i cracked the ufs
but the problem is that .i can't get a bb5 setup v 14 tst.the link above is working.but it asking password .plz gie me a link for bb5

**andre128** · 26-12-2005 08:08 AM

get it here

**nijascm** · 26-12-2005 10:43 AM

thanx a lot
i will try and inform u if any problem
nijas from sizcom calicut

**nijascm** · 27-12-2005 07:52 AM

hi friend
here i succesfully done all the work
but the problem is that 6630 is now dead after flashing
i tried with two different files .flashing copleted and rebooting mobile message is appeared but.the phone is not turn to on

give me a solution

**andre128** · 27-12-2005 01:06 PM

what cable you use? i use 7 pin batt with 9v batt

select .cor as mcu, and any ppm you want

**nijascm** · 27-12-2005 03:11 PM

here i using cloned ufs with 5 pin
i think its flashing is success.in first i forgot to check the version of sw in phone i guss it is 2 or 3 .i flashed it with v 5.is ithe phone need correct version of software .do u have any idea

**andre128** · 28-12-2005 06:59 AM

5pin cable need with vpp, to flash bb5 need more than 10 min to finish, only can upgrade can't downgrade...

do you have screen shot after flashing?

**nijascm** · 29-12-2005 12:32 PM

yes "flashing completed and rebooting mobile ".its the last message.its take nearly 8 minitue.here ihve only get 5 pin cable.i dont know how to connect other connector with vpp.is my phone will work if i flashed it with an original hwk ufs.plz reply me.i flashed it with all version.screen shot is in my computer but i dont know how i post it

**andre128** · 30-12-2005 04:33 AM

BB5 phone VPP adapter for UFSx HWK
For switching the 9V of BB5 over sarasbox (e.g, N-BOX,UFS3, TONADO ,Twister, incl clone twisters) & UFSx HWK

**neilthirumuttam** · 03-01-2006 02:02 AM

Originally Posted by neilthirumuttam

I again done every thing form the very begining

shorted the two pins

1. with mprog i wrote the ufs good ept
2. with ufs tool emulated hwk
3 calculated the strings and connected

still with nokia it shows the error
"un eoxepted exeption: BOX ERROR: 1020

previous error code now changed

but to samsung & se it works
what myay be possible fault
iused allthe exes from the link
said above
14 tst reures encription password
that i dont hve
allthe others the same result

pls some one help meeee..........

**andre128** · 03-01-2006 06:27 AM

ai yaa..... why you use mprog???? i didn't tell you... that method for cracked v1(need strings)

now v2 no need already mah... and now can support sams v1.4w

now, you need reprogram you box...
http://www.schwantz-i.com/zip/UFS_Maintenance_v20.zip

**nijascm** · 03-01-2006 10:41 AM

i do teh folowing steps
1 changed my ufs serial number by ufs maitainance soft
2 upgraded the firm version to 2'6
3 emulate hwk (after copleting this windows shows an error) and shorted the ic of my cloned box
4 down load bb5 test
5 down load all versins of 6630 files from ufs original site

part 2
the danger things is happening
6 flash the phone with version 5.08
after 10 miniutes flashing completed but................phone is dead
in here only rj45 cable
7 i flashed the phne with all version but all versionare same result
8 days are going flashing flashing flashing but phone is dead

9 lost my patient and go enqire about hwk
10 go to one shop thats 225 km far from me and give 40 dollar

11 they flashed my phone and return me in ok condition
12 i stopped my experiment

**andre128** · 04-01-2006 04:11 AM

flash wont kill your phone except the flash chip damage

**neilthirumuttam** · 06-01-2006 03:03 AM

[This error started after updating inUFS3 Calc Sring & HWK Emulator
byDC ITC Bdg
as u mentioned above
after that I said in this forum
nobody responded that is y I tried in mprog
and got working in se and samung
only to the nokia exe it shows the error
I alredy tried this
in UFS maintanace also
the result was same

every sujession foung in this forum done stil....

I think that u can help .

**neilthirumuttam** · 07-01-2006 01:31 AM

Originally Posted by andre128

ai yaa..... why you use mprog???? i didn't tell you... that method for cracked v1(need strings)

now v2 no need already mah... and now can support sams v1.4w

now, you need reprogram you box...
http://www.schwantz-i.com/zip/UFS_Maintenance_v20.zip

andre..
This error started after updating inUFS3 Calc Sring & HWK Emulator
byDC ITC Bdg
as u mentioned above
after that I said in this forum
nobody responded that is y I tried in mprog
and got working in se and samung
only to the nokia exe it shows the error
I alredy tried this
in UFS maintanace also
the result was same

every sujession foung in this forum done stil....

I think that u can help .

**andre128** · 07-01-2006 04:16 AM

try fix the problem with ufs3 tools i've posted before...

**josetolo_jr** · 07-01-2006 09:06 AM

Hi mate,

Do you have the above soft?, please if you could share with us.

Thanks & best regards
josetolo_jr

Unlock Iphone by IMEI - Unlock Samsung by IMEI - Unlock Nokia by IMEI - Unlock Blackberry by IMEI

Thread: ufs3 firmware

LinkBack

Thread Tools

Rate This Thread

Display

ufs3 firmware

ufs tools

shorting

ufs

Ufs Problem

Result

error

thanks

error

cracked hwk

sos

6630 version problem

iam sure it is flashed

tell me what was happend

auth error

UFS3 Calc String & HWK Emulator by DC ITC Bdg

Thread Information

Users Browsing this Thread

Similar Threads

Samsung firmware

UFS3 + Total Server + Moto Serv and more

changes to 6210 firmware since V4.08

Ultimate 8 cd GSM collection - all firmware, all brands, all software tested for £15!

how to flash new firmware to my nokia 6150?

Bookmarks

Bookmarks

Posting Permissions